Browse all practice questions for the EESTX 33303 Wireless Communication Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

EESTX 33303 Wireless Communication Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What does the term "bandwidth" refer to in wireless communication?
  • What is the primary regulatory authority for wireless communications in the United States?
  • In a wireless LAN, which device acts as the direct interface between the wired network and the wireless network?
  • Which technique is used to allow multiple users to share the same bandwidth in wireless communication?
  • What is a primary difference between 2G and 3G mobile communication technologies?
  • Is it true that single antennas can be mounted in multiple ways depending on their size, weight, and construction?
  • Which term describes the ability of a communication system to accommodate an increasing amount of data?
  • What is typically measured in bits per second (bps) in wireless communication?
  • What does the term 'handoff' refer to in cellular systems?
  • Which component is primarily used to convert analog signals into digital form in wireless communication?
  • In an IEEE 802.11 wireless network, use of the network is controlled by a(n) _____.
  • What does the Nyquist theorem define in relation to wireless communication?
  • What does the term 'bit error rate (BER)' measure?
  • What are the two basic types of infrared (IR) systems?
  • What is the purpose of error detection in wireless communication?
  • When a device such as an access point is compatible with PoE, it is NOT necessary for it to be located close to a(n) _____.
  • Which type of antennas can adapt their beam direction to enhance signal quality?
  • Compared to current data transfer speeds, how much faster can 5G technology potentially be?
  • What is the difference between 2G, 3G, 4G, and 5G networks?
  • Where can one find the installation and grounding requirements for antennae?
  • What is a common application of a repeater station?
  • The process in which low-capacity communications channels are combined into a single channel is known as what?
  • In the context of wireless communication, what is modulation?
  • What capability do most satellite signal meters have to evaluate the antenna dish and LNB?
  • Which regulatory agency oversees telecommunications in the United States, including satellite orbit allocations?
  • What does the term 'handoff' mean in mobile wireless networks?
  • What are the two types of channel coding techniques?
  • What is the function of an access point in a WLAN?
  • What are the key components of a wireless communication system?
  • What prevents interference in optical fiber communication systems?
  • Which of the following best describes Frequency Hopping Spread Spectrum (FHSS)?
  • What is the basic principle of wireless communication?
  • A point-to-multipoint satellite uplink/downlink configuration is mainly utilized for what purpose?
  • Which aspect of wireless communication does Digital Signal Processing primarily address?
  • Which type of communication is less susceptible to interference and is used in various wireless technologies?
  • Smart antennas are designed to minimize what type of issue in wireless communication?
  • Why is monitoring signal quality important in wireless communications?
  • Which of the following uplink/downlink configurations is used where mobile or fixed-station point-of-sale terminals are linked to a home office?
  • Which technology allows higher frequencies to be used in wireless communication?
  • What is the primary purpose of a wireless communication system?
  • In the context of wireless communication, what role does redundancy play within channel coding?
  • What type of data services does 3G mobile technology primarily introduce?
  • What occurs during network congestion?
  • What is the role of a cellular tower?
  • How is 'bandwidth' defined in the context of wireless communication?
  • What are the primary components of a wireless communication system?
  • What is a major factor affecting Quality of Service (QoS) in wireless networks?
  • What is the function of the transport layer in the OSI model?
  • What does the term 'handoff' refer to in GSM networks?
  • What is the purpose of multiple-input multiple-output (MIMO) technology?
  • What is a key advantage of using communications satellites in low-earth orbit instead of geostationary orbit?
  • What does 'network topology' refer to in wireless networks?
  • Each node device on a wireless LAN requires the use of a(n)?
  • What is the primary benefit of using multiple antennas in wireless communication?
  • When converting analog voice signals to digital signals, what must the sampling rate be?
  • What is the significance of the Shannon-Hartley theorem?
  • The uplink/downlink configuration primarily used for commercial network TV and radio is?
  • The network encryption key and the access point password are the same thing. Is this statement true or false?
  • What does 'asynchronous transmission' imply?
  • What is 'frequency hopping' in wireless communication?
  • What is the primary function of a router in wireless communication?
  • What does the term 'signal-to-noise ratio' (SNR) mean?
  • What is the function of a carrier signal in wireless communication?
  • What is the modulation index in frequency modulation?
  • What is the primary purpose of a signal-to-noise ratio (SNR) in wireless systems?
  • In a satellite communication system, what is a key advantage of using satellites for data transmission?
  • What device produces the carrier frequency in a transmitter?
  • What is the role of propagation models in wireless communication?
  • In cellular networks, what does a 'cell' refer to?
  • What is an important setup step for each component of a wireless system?
  • How is 'Quality of Service (QoS)' utilized in VoIP?
  • What is one benefit of using MIMO technology?
  • In wireless communication, what does 'bandwidth' refer to?
  • What does a spread spectrum technique achieve in wireless communication?
  • What does 'QoS' stand for in wireless networks?
  • What main issue can an echo cause in a wireless communication system?
  • If a transmission line shows a VSWR of 30:1, what does it indicate?
  • In which modulation method is the time interval between sine waves varied to reflect information signal variations?
  • What is one function of modulation in DSP?
  • What does Digital Signal Processing (DSP) involve in wireless communications?
  • In wireless communication, what does the term 'bandwidth' refer to?
  • What is the primary distinction between narrowband and broadband in wireless communication?
  • What is the role of a base station in a cellular network?
  • What is the role of a Network Interface Card (NIC) in a wireless context?
  • Which of the following is a key feature of Bluetooth technology?
  • Which system operates in the highest frequency range?
  • What type of signal does a DSP primarily deal with?
  • Which of the following frequency bands is NOT typically used in wireless communication?
  • What role do repeaters play in wireless communication?
  • Which of the following bands represents the highest frequencies?
  • What is the primary function of an antenna in wireless communication?
  • What is 'antenna gain'?
  • Give an example of a physical layer protocol in wireless communications.
  • What does NIC stand for in wireless LAN terminology?
  • A test instrument used to determine the frequency and relative power of RF signals is called a(n) _____.
  • In wireless communication, what does the term 'downlink' indicate?
  • What term describes a communication method that allows multiple users to share the same bandwidth?
  • How do smart antennas function in wireless communication?
  • A multipoint-to-point satellite uplink/downlink configuration is primarily used for?
  • A dish-shaped antenna, such as those used in satellite TV systems, is called a _____.
  • What distinguishes omnidirectional antennas from directional antennas?
  • Communication satellites in geostationary orbit are primarily used for?
  • What does 'line-of-sight communication' require?
  • What best defines 'noise' in the context of wireless communication?
  • What is 'OFDM' in terms of modulation technique?
  • Which of the following is a common modulation technique used in wireless communication?
  • What occurs when a device experiences latencies in a network?
  • Which two main types of spread spectrum techniques are commonly used?
  • Multiplexing is a form of combining several _____ into one high-capacity channel.
  • What does the VSWR indicate in a transmission line?
  • What does QAM stand for in wireless communication?
  • Which of the following is an example of a wireless personal area network (WPAN)?
  • For optimal operation of a transmitter system, what should the voltage standing wave ratio (VSWR) be?
  • Which of the following are key standards for WLAN technology?
  • In what way does channel coding contribute to communication systems?
  • What is a wireless local area network (WLAN)?
  • Of the frequency bands listed, which one covers the LOWEST range of frequencies?
  • Why is signal modulation important in wireless systems?
  • Which of the following is NOT a method of error correction in wireless communication?
  • What is the role of a transceiver in wireless communication?
  • Which type of connection allows a single node to communicate with multiple nodes?
  • The use of wireless LAN equipment normally conforms to _____.
  • Which component acts as the transducer in a radio transmitter?
  • Which type of antenna is made of two parallel wires with the ends connected?
  • Which antenna type is widely used in satellite television?
  • Along with super-fast data processing speeds, what additional benefit does the millimeter band offer?
  • What function does a modem serve in wireless communication?
  • What type of satellite beam covers all or a significant portion of a single country?
  • What is WiMAX primarily known for?
  • Which of the following best describes bandwidth in a network?
  • What does interference refer to in wireless communication?
  • What is one application of RFID technology?
  • Which of the following best describes the relationship between DSP and signal quality in wireless systems?
  • What does the acronym 'ISDN' represent?
  • Which component controls the wireless communication protocols in devices?
  • What does Frequency Division Multiple Access (FDMA) involve?
  • What is a 'handover' in mobile communication?
  • In actual conditions, standing wave ratios are always _____.
  • Another term that refers to the hop rate of spread spectrum signals is _____.
  • In the context of wireless networks, what does 'backhaul' refer to?
  • Which of the following is a common standard for wireless local area networks (WLANs)?
  • What is the primary purpose of modulation in wireless communications?
  • What is an adversarial attack in wireless communication?
  • What is meant by network topology?
  • The type of interference that comes from devices that radiate energy is known as?
  • The US regulatory agency that assigns satellite orbitals is the?
  • What does the term 'echo' refer to in wireless communication?
  • Antenna alignment is primarily accomplished using which instrument?
  • What type of antenna has two or more antenna elements connected to the feed line?
  • A wireless computer LAN connection may not be a good choice in _____.
  • The term gigahertz (GHz) represents a frequency in the _____ of cycles per second.
  • Which of the following antennas is typically used in mobile devices for better reception?
  • Which of these CORRECTLY states the relationship between frequency, wavelength, and antenna size?
  • A typical power meter is capable of measuring power levels ranging from _____.
  • Which of the following terms best describes the effective communication rate in a network regardless of its capacity?
  • What is the second major concern when installing antennas after safety?
  • What is the main difference between Time Division Multiple Access (TDMA) and Frequency Division Multiple Access (FDMA)?
  • What is one advantage of a Low Earth Orbit (LEO) satellite system?
  • What factors affect the range of a wireless communication system?
  • What does the term 'line of sight' refer to in wireless communication?
  • What type of system is NOT affected by electromagnetic interference (EMI)?
  • How does amplitude modulation (AM) differ from frequency modulation (FM)?
  • What is the meaning of 'amplitude modulation (AM)'?
  • What technology allows for multiple paths in a network for efficient signal transmission?
  • What does Quality of Service (QoS) prioritize in VoIP technology?
  • What is the frequency range for FM radio signals?
  • What is a characteristic of IEEE 802.11?
  • The device that enables the wireless detection of infrared signals is a(n) _____.
  • What does frequency reuse accomplish in cellular systems?
  • What impact does fading have on wireless signals?
  • Which type of signal delay is reduced by using low-earth orbit satellites?
  • What is a wireless sensor network (WSN)?
  • What is the purpose of the Open Systems Interconnection (OSI) model?
  • The device used to measure FM, AM, and single-sideband signals in an application, such as a mobile communications system, is a(n) _____.
  • The purpose of a collimator tube is to _____.
  • Why is a repeater station important for long-distance communication?
  • Which connection type involves a direct link between two nodes?
  • What is modulation in wireless communication?
  • What does the signal-to-noise ratio (SNR) indicate in wireless communication?
  • What can cause an echo in wireless communication?
  • What is multipath propagation and its effects on wireless communication?
  • Which technique is used to reduce interference in wireless communication?
  • What does the term 'handoff' mean in wireless communication?
  • Which test equipment would be used to locate the source of RFI?
  • A frequency of 2.4 GHz is most commonly used in what application?
  • What does 'antenna gain' indicate in wireless communication?
  • How does MIMO technology enhance wireless communication?
  • How does a digital signal processor (DSP) improve functionality in wireless systems?
  • A wireless network is identified by what?
  • What is the function of a base station in a wireless network?
  • What are routing protocols in wireless networks?
  • Which uplink/downlink configuration is primarily used for commercial communications carrier systems?
  • In wireless communication, what does increasing the modulation index lead to?
  • Which of the following best defines the concept of signal fading?
  • What is the primary role of antennas in wireless communication?
  • How does Amplitude Modulation (AM) encode information?
  • In the context of wireless networks, what is 'throughput'?
  • What is meant by 'mesh networking'?
  • Which of the following is critical for assessing the reliability of a communication link?
  • What describes the change in frequency or wavelength of a wave as observed by someone moving relative to the wave source?
  • What is spread spectrum technology?
  • What is the primary function of a digital signal processor (DSP) in wireless systems?
  • Installation and bonding/grounding requirements for communication antennas are covered in?
  • Which modulation technique is commonly used in digital communication?
  • What kind of signals typically utilize amplitude modulation?
  • What is the main function of a satellite communication system?
  • What is the main advantage of using directional antennas?
  • What is the role of a codec in wireless communication?
  • What is a repeater station in wireless communication?
  • Explain the concept of a 'cell' in a cellular network.
  • What is a mesh network in wireless communication?
  • What signal property is adjusted in modulation for effective data transmission?
  • Which of the following statements is true concerning signal degradation?
  • What is described by the term 'service area' in wireless communication?
  • What does the term 'latency' refer to in wireless communication?
  • What is the term for unwanted electrical signals induced into or superimposed onto a power or signal line?
  • What does the term 'signal-to-noise ratio' indicate in wireless communication?
  • Which technique is used to improve data transmission quality over long distances in wireless communications?
  • What does the term 'data rate' refer to in wireless communication systems?
  • What is the role of jamming in wireless communication?
  • What role does the Federal Communications Commission (FCC) play in wireless communication?
  • Which of the following is a correct statement about a satellite television antenna?
  • What does signal attenuation refer to in wireless communication?
  • When a repeater is used to link dissimilar media, it is called a _____.
  • What is the purpose of encryption in wireless communication?
  • What type of communication is typically used for high-speed data transmission?
  • What do the terms 'uplink' and 'downlink' refer to?
  • What is the practice of using the same frequency bands in different geographical areas to enhance capacity in cellular networks called?
  • Which is an example of a wireless sensor network (WSN) application?
  • What does the acronym 'LOS' stand for in wireless communications?
  • What benefit does Bluetooth technology offer besides low power consumption?
  • Which is a common use for the UHF frequency band?
  • Diffused IR systems are often used in lieu of RF wireless transmissions because _____.
  • What type of modulation is primarily used in FM broadcasting?
  • What is the primary function of a repeater in a communication system?
  • Infrared (IR) systems operate at a band of frequencies _____.
  • What does 'cell border' refer to in cellular networks?
  • What is the purpose of channel coding in wireless communication?
  • What is a key characteristic of omnidirectional antennas?
  • In GSM networks, what occurs during a handoff?
  • Which component is crucial for converting an analog signal to a digital one?
  • How do CDMA and GSM differ as mobile technologies?
  • What are 'wireless standards'?
  • How does spatial diversity improve wireless communication?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy